| Uploader: | Nikonris |
| Date Added: | 4 July 2006 |
| File Size: | 50.91 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 1249 |
| Price: | Free* [*Free Regsitration Required] |
PC system requirements Operating system: My next post will talk about the software provided by the manufacturer to drive this thing. Meaning, the DAC feeds each a voltage from If you provide us with your contact information, we will be able to reach you in case we have any questions.
This simply increments the serial numbers in the buffer each time a new device is inserted. The Vcc voltage can be 2.
Reed relays — 10 of them. In any case, I could find virtually no info about this thing online; surely someone had hacked on one of these things before?
In some order, here are the major parts on the board: Im gonna guess the? Each driver can source mA, and it has an overcurrent detection output, which is fed back into the controller circuitry and causes the device to give you an error message when you put your chips in backwards.
This prevents damage from faulty chips during the programming cycle.
Software updates via web. This was state-of-the-art, 10 years ago. This might get you on track as to the programming: Moreover, different package devices within 48 pins will only require one adapter.
This feature is especially useful with secondhand chips and devices that have had their part number accidentally or intentionally removed 48x; function only applied to 28 pin or 32 pin EPROM and Flash. It laabtool detect 48xpp pin contact and devices inserted upside down or in the wrong position. In addition, the LabToolUXP's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device. Serialization function If your memory devices need individual serial numbers with different increment sequence and initial value, the LabToolUXP has an Auto Increment function.
This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter. This simply increments the serial numbers in the buffer each time a new device is inserted. You must log in to post a comment.
These seem to be driven by the output of the shift registers? Information Request Form Please tell us what you think about our web site, company, products, or services.
This saves time and money. Software updates via web.
LabToolUXP Upgrade Kit
Presumably used to drive the 4 power supplies Vcc, Vpp1, Vpp2, Vpp3 mentioned in the marketing copy Power supply section — what we have here is an LMT used as a general voltage regulator? Less then 2 seconds per Mbit Programming speed for high density flash chip.
A x2 — these are bit, high drive-capacity shift registers. Technological innovation and performance labool. This part has 8 buffers which are presumably used in combination with the open-drain latches above to form a push-pull circuit for each pin. labtook
labtool 48xp programmer circuit diagram and partlist
Keep up the amazing work! This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket.
